| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

Shopping List

Page history last edited by Michael 14 years, 8 months ago

Have you found a particular part for a particular conversion?  Let's add them here.

Please be as specific as you can giving the year and type of the 944 as well as the year, designation, and size of the motor.

There are many different ways to catalog these parts so we can start with general motor designation and work from there.

 

 

GM LSX engines: (including the *Vortec 4.8L and 5.3L LQ4 / LR4 / LM4 / LM7 / L59 Truck Engines, 5.7L and 6.0L LSX Engines)

*Due to hood clearance issues, the LS1 and later intake manifold and F-body accessory setup must be used with the 4.8L and 5.3L engines.

 

 

*NOTE: The LS kit is still available from Renegade Hybrids, although there are alternatives...

 

 

 

  1. QuickTime, Inc. spun-steel safety bellhousing #RM-6033 (utilizes C5 T/O bearing or early SBC 4 speed bearing retainer Richmond Gear #1304027001 / Summit Racing and RAM #78125 or similar)

    OPTION: '97 up Corvette C5 bellhousing (part # 12554980) and adapter plate

  1. Clutch disc w/ 1" x 23 spline hub 
  2. GM LS flywheel

          OPTION: McLeod LSX conversion flywheel #460535 (Summit Racing – allows use of early   non-metric SBC clutch components)

  1. Custom oil pan (Renegade Hybrids), or modified Milodon #697-30915 (JEG'S) or modified Moroso #20140
  2. Custom LS pilot bearing (1” thick pilot adapter with 944 roller bearing)
  3. Headers (Renegade Hybrids or modified Sanderson headers)
  4. GM hydraulic throwout bearing (JEG'S #770-056288)
  5. Renegade Hybrids master cylinder mount and pushrod

          OPTION: Wilwood tandem master cylinder #260-7563 and installation kit

  1. Ignition coil relocation bracket
  2. Modified ECM wiring harness
  3. Engine mounts - 1973 Chevy Nova V8 (among others) - Advanced Auto #2142
  4. Engine uprights (locate engine mounts)
  5. Engine mount plates (adapt SBC engine mounts to LSX block) Trans-Dapt #4572
  6. Custom throttle cable
  7. 3.5" intake boot and tubing (JagsThatRun.com)
  8. 4" x 3.5" 90 degree elbow (JagsThatRun.com)
  9. Cone-type air filter
  10. Oil pressure sending unit (VDO)
  11. Coolant temp. sending unit (VDO)
  12. Custom remote oil filter lines
  13. Remote T/O bearing bleeding system (not a necessity, but convenient)

 

 

 

LSx GM Part Numbers Here...

 

LSx Dimensions and Clearances Here...

 

 

GM Small Block and LTx motors:

 

 

 

 

 

  1. QuickTime Inc. bellhousing #RM-6033 (utilizes C5 T/O bearing or RAM #78125 or similar with GM bearing retainer)

          OPTION: '97 up Corvette C5 bellhousing (part # 12554980) and adapter plate

          OPTION: Stock (6.29" depth) SBC bellhousing w/ adapter plates developed by PHB members

  1.  Hydraulic Throwout Bearing – RAM #78125 or similar, used with

          OPTION: RAM, Hayes, or McLeod hydraulic bearing

(McLeod also offers a bolt-on version, that eliminates the bearing retainer)

  1.  *Slave Cylinder - '84-88 Vette, GM#14087254 (RH replacement)
  2.  Pilot bearing adapter (developed by PHB members)
  3.  Porsche 944 pilot bearing 
  4.  GM bearing retainer (Richmond #1304027001 from Summit Racing)
  5.  Engine mounts - 1973 Chevy Nova V8 (among others) - Advanced Auto #2142
  6.  Engine uprights (locate engine mounts)
  7.  Flywheel – 1986-up 168T flywheel (for 1-piece rear main seal)

          OPTION: SPEC Clutches SC35S for steel (22lbs), SC35A for aluminum (12lbs)

          OPTION: GM Performance Parts # 809-14088646 Nodular Iron (16 lb.) flywheel     

  1.  Flywheel Bolts - ARP ARP100-2801
  2.  Clutch 1" X 23 spline, early Mopar: 

           OPTION: McLeod (#260101) *with C5 or QTI BH & 11" 168T flywheel

           OPTION: McLeod (#360803) pressure plate, also w/ C5 BH & 11" 168T flywheel

           OPTION: CarolinaClutch.com (Part # 05-029)

           OPTION: Advanced Auto Parts (Part #NU1506)

  1.  Throttle Cable - 1997 Camaro (no listing on traction control or not) GM#12550676
  2.  Oil pressure sending unit - VDO 360-009 (JEG'S)
  3.  Coolant temp sending unit - VDO 323-421 (JEG'S) 
  4.  Plug wires (fit GREAT in stock LT1 brackets under any header) MSD-32149
  5.  4" x 3.5" 90* intake elbow & tubing (JagsThatRun.com)
  6.  Cone-type air filter
  7.  Modified wiring harness
  8.  Headers: Sanderson / 1 each, CC90 & CC2 (driver and passenger sides) 

          OPTION: Patriot Ceramic coated tight tuck headers #H8052-1 (JEG'S)

 

LT1 Dimensions and General Specifications Here... 

 

LT1 shopping List With Part Numbers and Prices Here... (this is a list being used for a current conversion)

 

GM / LT1 Part Numbers:

10105379 Stock 48mm throttle body gasket

12524653 Intake manifold gasket set

12552469 Exhaust manifold gasket set

10168457 Stock .049" head gaskets (Aluminum heads)

12369145 Head Gasket Kit (includes intake/heads (aluminum)/exhaust/etc)

10128293 Front cover (timing cover) gasket

12552428 Front cover Optispark Seal

10128316 Front cover crank seal

10474278 Distributor drive shaft seal

12553792 Water pump drive seal

10217886 Water pump front seal

10128343 Water pump gasket (2)

12527741 LT1 Water Pump

10046089 Centerbolt Valve Cover Gasket

25171377 Oil Filter AC PF52(Duraguard)

25325403 Oil Filter AC PF52(Duraguard Silver)

25322836 Oil Filter AC PF52(Ultraguard Gold)

10108676 Oil Pan Gasket

12551589 Oil Filter Adapter gasket

10244495 Oil Filter Adapter o-ring

14090908 oil cooler tube seals (2)

17113382 OEM EGR Valve

17113381 F-Body EGR valve

12337972 EGR Valve Gasket

10055726 EGR Tube Gasket

25095452 PCV VALVE

12556257 PCV PIPE

12551389 PCV valve elbow

10240678 PCV grommet

460483     Engine valve oil seal

10046089 iron head rocker cover

25121978 fuel filter

12370835 LT1/LT4 Extreme Duty Roller Timing Set

12555885 LT1/LT4 Roller Timing Set Cam Gear (95+ LT1) or 94 + B-body

12555886 Lt1/LT4 Roller Timing Set Crank Gear (95+ LT1) or 94 + B-body

12555887 LT1/LT4 Roller Timing Set Roller Chain (95+ LT1) or 94 + B-body

10128346 LT1 Link-Chain Timing Set Crank Sprocket

10128485 LT1 Link-Chain Timing Set Link Chain

10126039 95+ LT1 Link-Chain Timing Set Cam Sprocket or 94 + B-body

10476885 Crank position sensor SEAL (96 only--OBD II)

22146273 left motor mount (LT1)

22146274 right motor mount (LT1)

12555714 Rear main seal housing gasket

17113086 Pressure regulator seal kit

10115875 1LE AC delete pulley

16188051 94-95 LT1 PCM

16188309 Knock module - LT1 95 Impala SS

16217700 Knock module - LT1 F-Body OBD-I

16214661 Knock module - LT1 F-Body OBD-II

16214671 Knock module - LT1 Corvette

16214681 Knock module - LT4 Corvette

16214691 Knock module - LT1 Impala 2

25008308 3.5" MAF sensor

2503679  1 bar MAP sensor

25312184 O2 Sensor

1997223   EGR Solenoid

10457293 Optispark Cap & Rotor Kit (including bolts/cover/o-rings)

10455709 Starter--gear reduction, lightweight, new, no core, from 92-96 LT1 Corvette

10258505 SEO Heater flow control valve w/Green hoses 8.866 (also ACDelco 15-5538)

10258504 Heater flow control valve w/Black hoses 8.866 (also ACDelco 15-5508)

10157988 Heater flow control valve w/o hoses 8.866 (also ACDelco 15-5423)

12522867 Tee, Heater water bypass valve outlet hose

10208794 Corvette LT1 Fuel Rail Cover (Drivers)

10208795 Corvette LT1 Fuel Rail Cover (Pass.)

10108672 Fuel Rail Cover Studs

10108672 Fuel Rail attachment studs

 

1993-1997 F-body / LT1 Wiring Replacement Pig Tails

 

AC-Delco Part #                                  Usage                                                                        GM part #

 

PT114 Fuel Injector 12085491
PT121 oil pressure switch 12085499
PT123 1993-1997 MAP sensor 12085502
PT189 1993-2002 radiator cooling fan motor 12101917
PT209 1993-1997 A/C compressor 12101937
PT307 IAT  12102620
PT368 1994-1997 front O2 sensor 12102741
PT375 1993-1997 TPS and a/c pressure sensor 12102748
PT494 1993-1997 Alternator 88987962 / 12117361
PT757 1993-1997 ICM  12126487
PT919 1996-1997 rear O2 sensor 15305801
PT1795 1996-1997 ignition coil (single connector) 88987992

 

Other motors:

 

  1.  GM / Buick V6 (Turbo 924 V6)
  2.  Ford 5.0L / 4.6L V8 (4.6L 944)
  3.  All GM LS Series Engines / LS1, LS2, LS3, LS6, LS7 (LS1 951)
  4.  Gen I & II Chevy Small Block V8 (924 Carrera GTS SBC V8)
  5.  California Emissions Legal LS1 V8
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  

 

 

 

Bell Housing/Clutch related:

 

    1.    Remote clutch bleeder for the LSx conversion. This kit allows you to bleed the master/slave without being

           under the car or making a mess. $75.00 in 2007. Contact: Carl LaMonte for the kit

          (black2002ws6@tampabay.rr.com)

 

 

    2.    LSx - Mcleod 600 series, good to 600hp. Part #260621. 11" x 1" x 23.

 

    3.    LSx - Mcleod 500 series, good to 500hp. Part #260521. 11" x 1" x 23.

 

    4.

 

    5.

 

 

Transmission related:

 

  1.  Solid top transaxle mount (Lindsey Racing)  951transmountLL.jpg
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  

 

 

Suspension related:

 

  1.  250 lb. front coil springs (pre-'86 cars require spacers) IMG_2198.sized.jpg
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  

 

Brake related:

 

 

  1.  25mm/21mm ATE master cylinder. 85.5 and newer. 1988 - 1994 BMW 750iL, Cardone rebuild part #112299.
  2.  Metric "T"and  2 longer flare nuts (M10 x 1.00)  for installing the above because the outputs are deeper on the BMW MC than on the 951 MC. http://www.fedhillusa.com/ part #s M1L-3  & TM18-3.
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  

 

 

 

 

 

 

 

 

 

Comments (0)

You don't have permission to comment on this page.